FREE SHIPPING on all orders over $100! See our shipping conditions. Shop Now!

ohcanadasupply page loader
PRODVID:
Out of Stock
{{ selectedVariation.title }}
Free Shipping at ohcanadasupply.ca Free Shipping at ohcanadasupply.ca

ESAB 11144100 110LB QP 7/64" STDY 100HC

  • CAD / PK
By:
ESAB logo
By:

ESAB

  • This item ( THR11144100 ) is a special order item. Please contact sales@ohcanadasupply.ca to purchase offline.
  • An additional core charge of ${{selectedVariation.CoreCharges}} applies to this product.
  • An additional environmental fee of ${{selectedVariation.EnviroFees}} applies to this product.

Loading....
Available
Out Of Stock
No Longer Available
Not Available

Features

Features

  • Metal-to-earth. Moderate to severe impact and abrasion - A high chromium-iron alloy recommended for applications subject to severe abrasion and moderate impact and heat
  • Develops very tight cross checking pattern and is frequently used in crushing applications
  • Generally limited to 2 layers although in the rebuilding of coal pulverizer rolls multiple layers can be applied using specific welding procedures
  • Deposits are not machinable or forgeable and can be used in hot wear applications up to 482°C
  • Welding Procedures/Characteristics: DC reverse polarity recommended using either stringer or weave beads
  • Increased deposition can be achieved using straight polarity but weld soundness will suffer
  • Can be applied to carbon, low alloy, and manganese steels
  • Recommended for downhand welding only
  • When multiple layers are to be run, stringer beads must be run and deposit must have tight (3⁄8" - 1⁄2") cross checking pattern in order to be successful
  • Applications: - Gyratory mantles, cage pins, scrubbers, crusher rolls
  • Nominal Composition: - Alloy content - 34% (Chromium, Carbon, Manganese, Silicon, Molybdenum), Iron Base
  • Typical Mechanical Properties: - Hardness: - 2 Passes on mild steel: 58-62 HRC; 2 Passes on Mang. steel: 51-55 HRC
  • On carbon or low alloy steel: Slightly magnetic
  • On Mang steel: Non-magnetic

  • Product details

Brand
Part Number
Manufacturer Part Number
Package Size
110 lb. Quarter Pak
Welding Parameters - Amps
200 - 400
Welding Parameters - Volts
26 - 30
Welding Parameters - Wire Ext
3/4” to 1-1/4”
Wire Dia - in
7/64
Wire Dia - mm
2.8
VIEW SDS SDS Sheet for 172-025
VIEW SDS SDS Sheet for