FREE SHIPPING on all orders over $100! See our shipping conditions. Shop Now!

ohcanadasupply page loader
Out of Stock
{{ selectedVariation.title }}
Free Shipping at Free Shipping at


  • CAD / EA
Miller logo


  • This item ( MLR951580 ) is a special order item. Please contact to purchase offline.
  • An additional core charge of ${{selectedVariation.CoreCharges}} applies to this product.
  • An additional environmental fee of ${{selectedVariation.EnviroFees}} applies to this product.

Out Of Stock
No Longer Available
Not Available



  • Portable SuitCase feeders that set the standard for performance and provide extreme reliability to stand up to the demands of construction and fabrication.
  • Setting the standard for performance.
  • Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from one weld to the next. Consistent wire feed speed is very important with large diameter cored wire, because small changes in wire feed speed make large changes in deposition rates.
  • Front panel has trigger hold, wire jog, and gas purge for easy operator access. (X-TREME feeders only)
  • Wide voltage range for small and large wires with no contactor chatter or arc outages Ultra-low drag inlet guide pins make loading the wire easy and does not deform the wire on the way into the drive rolls improving wire feeding performance.
  • Scaled wire pressure knob provides easy adjustment and consistent pressure on the drive rolls and wire.
  • Digital meters with SunVision™ technology can display voltage, wire feed speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight. (Meters are optional on SuitCase 8VS.)
  • Unique and durable case.
  • Impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants.
  • Builtin slide rails allow you to drag the feeder into position for welding.
  • Innovative feeder door design allows you to change wire while feeder is standing upright or laying down.
  • Case is available in two sizes. (X-TREME feeders only).
  • Extreme reliability.
  • Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.
  • Gun locking tab works with guns having corresponding locking grooves to prevent gun from being pulled out if the feeder is dragged by the gun.
  • Gas inlet recessed into back of case is protected from incidental contact by the weld cable, ensuring consistent and contaminant-free shielding gas delivery to the gun. Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
  • Standard remote voltage control saves the operator a trip back to the power supply for welding adjustments.
  • For applications where the feeder is within 100 feet of the power source and control cords are acceptable.
  • Processes: MIG (GMAW), Flux-Cored (FCAW)
  • Comes Complete with: Bernard Q300 MIG gun with reversible dual size (.045 and 1/16") VK drive rolls.
  • SUGGESTED POWER SOURCES: Invision MPa Series, Dimension Series, XMT Series (VS model not compatible with RC feeder), Bobcat Series, Trailblazer Series, Big Blue Series Note: Full functionality of ArcReach is only available with ArcReach power sources. RC feeder requires power source with 14-pin connector.
  • Industrial products are suitable for applications that do not require high-volume production. They typically have a 40 to 60% duty cycle and/or rated output of 300 amps or lower. Industrial products are an appropriate choice for professional welders.
  • Suggested Guns - Bernard Q300 (GMAW) Bernard S-Gun (GMAW) Bernard Dura-Flux (FCAW) Roughneck (GMAW) Ironmate FC-1260 (FCAW).

  • Product details

Part Number
Manufacturer Part Number
Dimensions (Imperial)
15.5 in (H) x 9 in (W) x 21 in (D)
Dimensions (Metric)
394 mm (H) x 229 mm (W) x 533 mm (D)
Input Welding Circuit Rating
425 A at 60% duty cycle
Maximum Spool Size Capacity
12” (305 mm)¸ 45 lb (20 kg)
Model Number
SuitCase 12RC
Net Weight
31 lb (14.1 kg)
Wire Diameter Range (Flux Cored)
0.030 in to 5/64 in (0.8 mm to 2.0 mm)
Wire Diameter Range (Solid Steel)
0.023 in to 0.052 in (0.6 mm to 1.4 mm)
Wire Feed Speed
50-700 IPM (1.3-17.8 m/min.)
VIEW SDS SDS Sheet for